Interfacial Engineering at Quantum Dot-Sensitized TiO2 Photoelectrodes for Ultrahigh Photocurrent Generation.

Metal oxide semiconductor/chalcogenide quantum dot (QD) heterostructured photoanodes show photocurrent densities >30 mA/cm2 with ZnO, approaching the theoretical limits in photovoltaic (PV) cells. However, comparative performance has not been achieved with TiO2. Here, we applied a TiO2(B) surface passivation layer (SPL) on TiO2/QD (PbS and CdS) and achieved a photocurrent density of 34.59 mA/cm2 under AM 1.5G illumination for PV cells, the highest recorded to date. The SPL improves electron conductivity by increasing the density of surface states, facilitating multiple trapping/detrapping transport, and increasing the coordination number of TiO2 nanoparticles. This, along with impeded electron recombination, led to enhanced collection efficiency, which is a major factor for performance. Furthermore, SPL-treated TiO2/QD photoanodes were successfully exploited in photoelectrochemical water splitting cells, showing an excellent photocurrent density of 14.43 mA/cm2 at 0.82 V versus the Reversible Hydrogen Electrode (RHE). These results suggest a new promising strategy for the development of high-performance photoelectrochemical devices.

Bipolar Membranes to Promote Formation of Tight Ice-Like Water for Efficient and Sustainable Water Splitting.

Bipolar membranes (BPMs) have recently received much attention for their potential to improve the water dissociation reaction (WDR) at their junction by utilizing catalysts. Herein, composite catalysts (Fe2 O3 @GO) comprising hematite nanoparticles (α-Fe2 O3 ) grown on 2D graphene oxide (GO) nanosheets are reported, which show unprecedentedly high water dissociation performance in the BPM. Furthermore, new catalytic roles in facilitating WDR at the catalyst-water interface are mechanistically elucidated. It is demonstrated that the partially dissociated bound water, formed by the strongly Lewis-acidic Fe atoms of the Fe2 O3 @GO catalyst, helps the "ice-like water" to become tighter, consequently resulting in weaker intramolecular OH bonds, which reduces activation barriers and thus significantly improves the WDR rate. Notably, Fe2 O3 @GO-incorporated BPM shows an extremely low water dissociation potential (0.89 V), compared to commercially available BPM (BP-1E, 1.13 V) at 100 mA cm-2 , and it is quite close to the theoretical potential required for WDR (0.83 V). This performance reduces the required electrical energy consumption for water splitting by ≈40%, as compared to monopolar (Nafion 212 and Selemion AMV) membranes. These results can provide a new approach for the development of water dissociation catalysts and BPMs for realizing highly efficient water splitting systems.

Detection of infectious hypodermal and hematopoietic necrosis virus and white spot syndrome virus in whiteleg shrimp (Penaeus vannamei) imported from Vietnam to South Korea.

In this study, whiteleg shrimp (Penaeus vannamei) imported from Vietnam were collected from South Korean markets, and examined for 2 viruses: infectious hypodermal and hematopoietic necrosis virus (IHHNV, recently classified as decapod penstyldensovirus-1), and white spot syndrome virus (WSSV). Among 58 samples, we detected IHHNV in 23 samples and WSSV in 2 samples, using polymerase chain reaction and sequencing analyses. This is the first report of IHHNV and WSSV detection in imported shrimp, suggesting that greater awareness and stricter quarantine policies regarding viruses infecting shrimp imported to South Korea are required.

An artificial solid interphase with polymers of intrinsic microporosity for highly stable Li metal anodes.

Polymers of intrinsic microporosity (PIM-1) have an appropriate pore size to reduce the solvation number of Li ions in electrolytes. This unique pore structure of PIM-1 as a solid interphase can suppress transport of solvent and consequently unwanted chemical reactions at the interface of anodes, thereby extending the cycle life of Li metal anodes.

Imidazolium Iodide-Doped PEDOT Nanofibers as Conductive Catalysts for Highly Efficient Solid-State Dye-Sensitized Solar Cells Employing Polymer Electrolyte.

The electrical conductivity and catalytic activity of nanofibrous poly(3,4-ethylenedioxythiophene)s (PEDOT NFs) was improved by redoping with dimethyl imidazolium iodide (DMII) as a charge transfer facilitator. Addition of the new DMII dopant into the PEDOT NFs reduced the concentration of dodecyl sulfate anions (DS-) predoped during the polymerization process and concomitantly enhanced the doping concentration of I- by ion exchange. Redoping with DMII increased the mobility of the PEDOT NFs by up to 18-fold and improved the conductivity due to the enhanced linearization, suppressed aggregation, and improved crystallinity of the PEDOT chains. The catalytic activity was also improved, primarily due to the increase in the compatibility and the effective surface area upon replacement of sticky DS- with the more basic and smaller I- of DMII on the surface of the PEDOT NFs. The charge-transfer resistance across the interface between the poly(ethylene oxide)-based solid polymer electrolyte and PEDOT NF counter electrode (CE) was thus reduced to a large extent, giving an energy conversion efficiency (ECE) of 8.52% for solid-state dye-sensitized solar cells (DSCs), which is even better than that achieved with Pt CE (8.25%). This is the highest ECE reported for solid-state DSCs with conductive polymer CEs under 1 sun conditions.

Triumphing over Charge Transfer Limitations of PEDOT Nanofiber Reduction Catalyst by 1,2-Ethanedithiol Doping for Quantum Dot Solar Cells.

Charge transfer between a conducting polymer-based counter electrode (CE) and a polysulfide (S2-/Sn2-) electrolyte mediator is a key limitation to improvements of solar energy conversion efficiency (ECE) in quantum-dot-sensitized solar cells (QDSCs). In this paper, 1,2-ethanedithiol (EDT) was doped into nanofibrous poly(3,4-ethylenedioxythiophene) (PEDOT NF) to overcome the charge transfer limitation between PEDOT NF and S2-/Sn2-. EDT not only helps to reduce the aggregation and thus enhance the linearization of the PEDOT chains but also changes the molecular conformation of the PEDOT chains from a benzoid to a quinoid structure. EDT-doped PEDOT NF-based CEs showed almost 3.7 times higher conductivity, better electrocatalytic activity, and improved compatibility with S2-/Sn2- in an aqueous electrolyte. As a result, the charge transfer resistance between the polymer-based CE and the S2-/Sn2- electrolyte was significantly reduced, resulting in over 3% ECE in QDSCs, more than double that of a bare PEDOT NF-based CE.